Owner`s manual

168
Creating drum patterns
Rev0.02
Changing a drum pattern’s name
1. Press [F1] (NAME) on the Drum Pattern Edit screen.
The Drum Pattern name screen will appear.
fig.20-032ad
2. Use [CURSOR] and the TIME/VALUE dial to change
the name character by character.
fig.20-32bd
At this time, the FUNCTION buttons operate as follows.
[F1] (INSERT):
An empty space of one character in length will be
inserted.
[F2] (DELETE):
A single character will be deleted.
[F3] (A<=>a):
The character type will toggle between uppercase and
lowercase.
3. Press [EXIT/NO].
The Drum Pattern Selection screen will appear once
again.
4. Press [F3] (WR•CPY•DEL).
The Write screen for drum patterns will appear.
fig.20-124d
5. Use the TIME/VALUE dial to select the drum pattern to
which the data is to be saved.
Only user drum patterns and song drum patterns may
be selected for saving drum pattern data. You will not be
able to select a preset drum pattern at this time.
6. Press [F3] (GO).
The new name will be saved together with the drum
pattern. When the message “Complete!” appears, it
indicates that saving has been completed.
Copying drum patterns
1. Press [F3] (WR•CPY•DEL) on the Drum Pattern Edit
screen.
The Write screen for drum patterns will appear.
fig.20-224d
2. Press [F1] (=>COPY).
The Copy screen for drum patterns will appear.
fig.04-0510d
3. Move the cursor to the “From:” field and select the
drum pattern to be copied using the TIME/VALUE dial.
fig.20-032cd
4. Move the cursor to “To:” and use the TIME/VALUE dial to
select the drum pattern to which the data is to be copied.
fig.20-032dd
Only user drum patterns and song drum patterns may
be selected as destinations for copying. In other words,
you will not be able to select a preset drum pattern at
this time.
5. Press [F3] (GO).
Copying of the drum pattern will begin. When the
message “Complete!” appears, it indicates that copying
has been completed.
If you select a different drum pattern or load a new
song without saving the current pattern, the new
name will be lost. This name will also be lost if you
turn off the BR-1200CD before saving.