Owner`s manual

130
Rev0.02
Using track-specific equalizers (Track EQ)
Setting the Track EQ
For details regarding basic equalizer operations, refer to
“Adjusting the sound of each track (Equalizer)” (p. 83).
The following section will deal with the finer points of
equalizer setting methods.
1. Press [EQ].
The Equalizer screen will appear.
fig.32-03d
2. Press [F1] (ON/OFF) to toggle the equalizer between on
and off.
3. Press [F3] (EDIT).
The Equalizer Edit screen will appear.
fig.32-04ad
4. Move the cursor to the parameter that you want to change
and select a new setting using the TIME/VALUE dial.
You will be able to hear how your new settings change
the sound.
HI GAIN -12–+12 dB
This parameter sets the gain (amount of boost or cut) for the
high-range equalizer.
HI FREQ 500 Hz–18000 Hz
This parameter sets the frequency for the high range equalizer.
MID GAIN -12–+12 dB
This parameter sets the gain (amount of boost or cut) for the
midrange equalizer.
MID FREQ 200 Hz–4000 Hz
This parameter sets the central frequency for the midrange equalizer.
MID Q 0.3–16.0
This parameter sets the range of change in gain for the
frequency set by “MID FREQUENCY.” A larger value results in
a narrower range of change.
LOW GAIN -12–+12 dB
This parameter sets the gain (amount of boost or cut) for the low
range equalizer.
LOW FREQ 40 Hz–1500 Hz
This parameter sets the frequency for the low range equalizer.
5. Press [EXIT/NO] several times to return to the top screen.
6. If you wish to store the modified settings, save the
current song (p. 70).
Switching equalizers between
stereo and mono (Stereo Link)
If you intend to apply an equalizer to a stereo-recorded track,
you will need to align the left and right EQ settings in order
to prevent differences in tone occurring on the left and right
(Stereo Link).
Use the following procedure to turn Stereo Link on and off.
1. Press [EQ].
The Equalizer screen will appear.
fig.32-03d
2. Use the track buttons or [CURSOR] to select one or
both tracks from a stereo pair.
3. Press [F2] (LINK ON).
Stereo Link will be toggled between on and off.
• Whenever Stereo Link is turned on, the parameters for
the equalizers on both of the linked tracks will use the
same values. When one of these parameters is modified,
the same parameter for the adjacent track will be
automatically and simultaneously modified.
• You can switch on Stereo Link by simultaneously
pressing two adjacent track buttons.
4. If you wish to store the modified settings, save the
current song (p. 70).
Only one set of equalizer settings can be saved per
song.
Tracks 9/10 and 11/12 are fixed as stereo tracks, and
therefore, Stereo Link will always be on for the
corresponding equalizers. It will not be possible to
turn Stereo Link off for these tracks.