Owner`s manual

119
Using insert effects
Section 3
Rev0.02
Modifying insert effect settings
To create a new effect, find the preset patch that is closest to
what you are looking for, and then change the settings to get
the sound just right. When you are saving a preset patch with
modified settings, you should save it as a user patch or a
song patch.
1. Press [EFFECTS].
The Effects Patch screen will appear.
fig.31-01d
2. Move the cursor to the patch number field and select a
patch using the TIME/VALUE dial.
When you move the cursor to the bank field and turn the
TIME/VALUE dial, you will be able to select a bank
other than that specified with the INPUT SELECT
button.
3. Press [F1] (EDIT).
The Effects Edit screen will appear.
fig.31-02d
4. Move the cursor to the effect block you want to edit.
fig.31-02ad
If the TIME/VALUE dial is turned counterclockwise at
this time, the solid lines indicating the effect block at the
current cursor position will switch to dotted lines,
indicating that the corresponding effect has been turned
off. Similarly, if the TIME/VALUE dial is turned
clockwise, the dotted lines will switch back to solid lines,
indicating that the effect has been turned on.
5. Press [F3] (=>PRM.).
The Parameter screen will appear.
fig.31-03d
6. Move the cursor to the parameter whose setting you
want to change and select a new value using the TIME/
VALUE dial.
7. If you also want to edit other effect blocks, press [F3]
(BLOCK<=) to return to the effects edit screen, and
then repeat Steps 4 and 6.
Note that you can press CURSOR [ ] or [ ] while on a
parameter setting screen to jump to the parameter setting
screen for the next effect block to the left or right, respectively.
8. Press [EXIT/NO] to return to the Effects Patch screen.
fig.31-04d
In order to indicate that the effect settings have been
temporarily changed, the bank number will be displayed
as “*TMP.” If you select a different patch, load a different
song, or turn off the BR-1200CD while “TMP” is being
displayed, all of the patch settings will return to their
previous condition. As it may not be possible to restore
these settings, the appropriate care should be taken.
9. To save your modified settings, carry out the procedure
described in “Saving insert effect settings” (p. 122).
Patch Number
Bank