Owner`s manual

108
Editing a recorded performance (Track Edit)
Rev0.02
• If time values are used to specify the above points and
you then switch the specification method to measures or
markers, a plus (+) character may be displayed to warn
that the indicated positions and the actual positions are
not the same. If you want to specify points using
measures or markers, this discrepancy can be eliminated
by using the TIME/VALUE dial to make settings in each
of the relevant screens.
• If you want to set the deletion range as extending from
the start to the end of the song, press [F2] (ALL).
7. When you have made all of the necessary settings,
press [F3] (GO).
The audio data will now be deleted, and when the
message “Complete!” appears, it indicates that this
operation has been completed.
8. Press [EXIT/NO] several times to return to the top
screen.
Erasing audio data (Track Erase)
The Track Erase function allows you to erase audio data from
a specified range; however, when audio data is erased in this
way, the section of audio data positioned behind it is not
moved forwards to fill the resulting gap.
fig.15-53
1. Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2. Move the cursor to the TRACK icon and press [ENTER/
YES].
Alternatively, you can press [F3] (TRACK) if the TRACK
icon is currently displayed.
The Track Menu screen will appear.
fig.15-05d
3. Move the cursor to the ERASE icon and press [ENTER/
YES].
Alternatively, you can press [F3] (ERASE) if the ERASE
icon is currently displayed.
The Track Erase screen will appear, allowing you to
select the track and V-Track from which audio data is to
be erased.
fig.15-56d
4. Use [CURSOR] and the TIME/VALUE dial to choose
the track and V-Track containing the unwanted audio
data.
If a name has been assigned to the selected track, it will
be displayed at this time.
fig.15-57d
5. If you want to erase audio data from other tracks using
the same settings (for range, etc.), move the cursor to
the position shown below and turn the TIME/VALUE
dial.
fig.15-58d
You will now be able to specify other tracks for the
removal of audio data over the same range.
If you want to cancel the erase operation for a specific
track, turn the TIME/VALUE dial counterclockwise
until a question mark (?) is displayed.
• Erase will not be performed for any line containing one
or more question marks.
• If you want to erase audio data from all V-Tracks or all
tracks, turn the TIME/VALUE dial clockwise until “*” is
selected.
• Alternatively, if you want to select all V-Tracks from all
tracks, select “*- *.”
START END Time
A