Owner`s manual
103
Editing a recorded performance (Track Edit)
Section 2
Rev0.02
Exchanging audio data
(Track Exchange)
The Track Exchange function allows you to exchange the all
recorded data between two different tracks.
Example: Exchanging all data between Tracks 1 and 2
fig.15-33
1. Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2. Move the cursor to the TRACK icon and press [ENTER/
YES].
Alternatively, you can press [F3] (TRACK) if the TRACK
icon is currently displayed.
The Track Menu screen will appear.
fig.15-05d
3. Move the cursor to the XCHANGE icon and press
[ENTER/YES].
Alternatively, you can press [F2] (XCHANGE) if the
XCHANGE icon is currently displayed.
The Track Exchange screen will appear, allowing you to
select the tracks and V-Tracks to be used as the exchange
source and destination.
fig.15-36d
4. Use [CURSOR] and the TIME/VALUE dial to choose
the tracks and V-Tracks between which you want to
exchange audio data.
If a name has been assigned to the selected track, it will
be displayed at this time.
fig.15-37d
5. If you want to exchange audio data between other
tracks, move the cursor to the position shown below
and turn the TIME/VALUE dial.
fig.15-38d
You will now be able to specify other tracks as the source
and destination of another exchange operation.
However, any track that has elsewhere already been
targeted as a exchange-destination track cannot be newly
selected as the exchange-destination track.
If you want to cancel the exchange of data between
specific tracks, turn the TIME/VALUE dial
counterclockwise until a question mark (?) is displayed.
• Data exchange will not be performed for any line
containing one or more question marks.
• As Tracks 9/10 and 11/12 are stereo tracks, it will not be
possible to select either of their mono tracks independent
of the other.
6. When you have made all of the necessary track
selections, press [F3] (GO).
The audio data will now be exchanged, and when the
message “Complete!” appears, it indicates that this
operation has been completed.
7. Press [EXIT/NO] several times to return to the top
screen.
Track 1
Track 2
Track 1
Track 2
A
A
B
B
C
C
D
D
E
E
Time