User`s manual

2-5 Saving and Exporting Data
You can take data obtained by scanning and creating polygon meshes and save it in a le format compatible with Dr. PICZA3.
You can also convert (export) data and save it in a le format allowing import into other programs.
Saving Data
Go to the [File] menu and click [Save As]. The data is saved in Dr. PICZA project format (with the le extension .pij).
In addition to working with saved les with Dr. PICZA3, you can edit them using 3D Editor, an editing program for 3D data.
Exporting Data
When you want to take data obtained by scanning and make use it with a 3D CAD program or other such program, you
export the data.
About Exportable Data
Scanning data is data for measuring points (scanning points) obtained by scanning.
Polygon-mesh data is data composed of new polygons created by estimating the proper shape of the scan object
from the scanning data.
Line-scan data and point scan data are measuring-point data newly obtained respectively by line scanning and
point scanning.
However, the exportable le formats for each type of data are predetermined.
For detailed information, refer to the online help for Dr. PICZA3.
Scanning data
DXF format, STL format etc.
Scanning data
Polygon-mesh data
Line-scan data
Point-scan data
Export
Choose some data.
Scanning data
Polygon-mesh data
Line-scan data
Point-scan data
Dr.PICZA project format
Scanning data
Polygon-mesh data
Line-scan data
Point-scan data
Save
All data is saved in a single le.
41
3. Creating 3D Data