User`s manual

Procedure

You perform rescanning using the following procedure. The screens shown are those for plane rescanning.



First, scan the entire object.

Choose a scanning mode according to the shape of the scan object.

From this point on, never open the door until rescanning ends. Doing so switches off the

power. Scanning cannot be resumed when you then switch on the power again.



When the scan of the entire object nished, click the

[

] button to choose the method you want to use

for rescanning.



Drag to specify the rescanning area.

You can specify more than one rescanning area.

You can speed up operations during basic scanning by scanning at a coarse pitch. For line scanning and point

scanning in particular, it is a good idea to scan at the minimum pitch necessary to get the general shape.

Shortcut Keys for Shifting the Perspective

 To Rotate the Object

Hold down the SPACE key and drag

 To Move the Object

Hold down the Ctrl key and drag

 To expand and reduce the Object

Hold down the shift key and drag

In addition to these shortcuts, you can also shift the perspec-

tive using the arrow keys. For detailed information, refer to

the online help for Dr.PICZA3.

SPACE key + drag left or right to shift

the perspective.

Drag to specify the

rescanning area.

2-4 Finishing the Data

2. Creating 3D Data