User`s manual

CAUTION
About the Power Supply
Do not use with a damaged AC adapter,
power cord, or power-cord plug, or with a
loose electrical outlet.
Doing so may lead to
re, electrical shock, or
electrocution.
Do not attempt to unplug the power-cord
plug with wet hands.
Doing so may result in
electrical shock or elec-
trocution.
Do not damage or modify the electrical
power cord, subject it to excessive bend-
ing, twisting, pulling, binding, or pinching,
or place any object or weight on it.
Doing so may damage
the electrical power cord,
leading to re, electrical
shock, or electrocution.
When unplugging the electrical power cord
from the power outlet, grasp the plug, not
the cord.
Unplugging by pulling
the cord may damage it,
leading to re, electrical
shock, or electrocution.
When not in use for several hours, unplug
the power-cord plug from the electrical
outlet.
Failure to do so may re-
sult in danger of electri-
cal shock, electrocution,
or re due to deteriora-
tion of electrical insula-
tion.
CAUTION
Operation and Handling
Lifting and carrying are operations that
must be carried out by two persons, by
grasping the bottom of the machine.
Failing to do so may result in injury.
Securely fasten the object to be scanned to
the table so that it does not slip or topple
over.
The table rotates during scanning. Tipover or
contact by the scan object may cause dam-
age. Scan-object damage is not covered by
warranty.
Do not use if the housing or window area
is cracked or deformed.
In such cases, there is danger of external
emission of Class 3R laser light. Staring at
externally emitted laser light may cause eye
injury.
Do not insert metal objects, ammable
objects, or any other foreign object into in-
terior areas other than the top of the table.
Also, do not place water or other liquids
on any area, including the table.
Doing so may cause re.
Never try to scan an object whose height
is 206.3 mm or more, or that protrudes
beyond the table.
The object may strike the interior of the ma-
chine, causing breakdown or damage. The
scan object may also be damaged. Scan-
object damage is not covered by warranty.
About the Installation Site
Install on a stable surface.
Failure to do so may
result in the unit tipping
over, leading to injury.
To Ensure Safe Use
2