User`s manual

Windows 2000

Start Windows and log on as "Administrator."

Insert the Roland Software Package CD-
ROM into the CD-ROM drive.
The setup menu appears automatically.

Switch on the machine.
Wait a short while until the lights stop ashing.
The ashing continues for about one minute.
From this point on, keep the door closed
until installation ends. Failure to do so
switches off the power, which may prevent
installation from completing correctly.

Connect the included USB cable.
The [Found New Hardware Wizard] dialog appears.

Click [Next].
USB connector USB cable
These lights ash
clockwise two at a time.
Press the power button.
USB port
The back of
the machine
Computer
1-3 Installing and Setting Up the Software
18
1. Preparing the Machine