Setup guide

10. When Moving the Unit
60
WARNING
Never put discharged uid or ink closed to re.
Doing so may cause the blaze.
CAUTION
To store discharged uid temporarily, keep it in the provided drain bottle
or in a durable container such as a metal can or polyethylene tank, and
close the cap tightly.
Any spillage or vapor leakage may cause re, odor, physical distress.
Store discharged uid in a location not exposed to direct sunlight.
When temporarily storing discharged uid in the included drain bottle, keep the drain bottle out of direct
sunlight. Otherwise the discharged uid may harden, making the drain bottle unusable.
Dispose of discharged uid properly, in accordance with the laws in effect in your locale.
Discharged uid is ammable and contains toxic ingredients. Never attempt to incinerate discharged uid
or discard it with ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may
have an adverse impact on the environment.
2. Secure the print heads in place.

Remove the drain bottle and detach the drain-bottle stand. Then attach the drain-tube
cover.

Detach the blade holder.
w
Raise the loading lever.

Secure the print heads in place using the packing material.
 P. 38, “Remove the Packing Materials”

Remove roll media from the media holder.
If necessary, also detach the dancer roller, rail slider, and stand legs etc.
The machine is now ready to be moved.
3. Immediately move the machine and ll it with ink.

Once the preparations are complete, move the machine with as little delay as pos-
sible.

Immediately reinstall the machine.
w
Press the sub power button.

Thereafter, follow the on-screen instructions to carry out the operations.
When lling with ink, you use the SOL INK cleaning cartridges again.
The Select Ink Type window is displayed. You can switch the ink type in this window.
 “Switching the Ink Type”, User’s Manual