Setup guide

7. Network Settings
54
w
Use to select the address number.
[SUBNET MASK]: 255.255.255.000
Note: For the subnet mask, make the setting the same value as the one used
by the computer. Here, "255.255.255.000" is entered by way of example.

Press .

Repeat
w
and

to set the subnet mask.

When you nish making the setting, press .
Press
.
{
Press to go back to the original screen.
If you use the computer and the machine one-on-one basis, this will complete the settings to make on the
printer. Go on to Step 3.
If you need to set the gateway address, then go on to the procedure following this one.
3. Set the gateway address.

From the screen displayed in
1.
－ | , press twice.

Press twice.
w
Use to select the address number.
[GATEWAY ADDR.]: 255.255.255.255
For the value to enter for your gateway address, consult your network ad-
ministrator. Here, "255.255.255.255" is entered by way of example.

Press .

Repeat w and  to set the gateway address numbers.

When you nish making the setting, press .
Press
.
{
Press to go back to the original screen.
SUBNET MASK
000 . 000 . 000 . 000
SUBNET MASK
255 . 000 . 000 . 000
SUBNET MASK
255 . 255 . 255 . 000
W 1346 mm
SETUP SHEET
ROLL
NETWORK
IP ADDRESS
NETWORK
GATEWAY ADDR.
GATEWAY ADDR.
000 . 000 . 000 . 000
GATEWAY ADDR.
255 . 000 . 000 . 000
GATEWAY ADDR.
255 . 255 . 255 . 255
W 1346 mm
SETUP SHEET
ROLL