Setup guide

49
6. Installing the Blade
CAUTION
Be sure to perform operations as specied by these instructions, and
never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the blade with your ngers.
Doing so may result in injury, and the cutting performance of the blade will be
impaired.
1. Insert a blade into the blade holder.
2. Enter the blade replacement mode.

Press .

Press several times until the screen shown on the
left appears.
Press
in this order.
w
Press .
Press
twice.

Press .
The cutting carriage moves to the position where the blade can be replaced,
and then the message on the left appears.

When this message appears, the preparation is complete.
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE KNIFE
NOW PROCESSING..
OPEN FRONT
COVER
FINISHED?
Insert the blade.
Insert the pin.
Insert the pin to the position where
its end sticks out about 3 to 5 mil-
limeters.
Blade
Blade holder
Pin
Cap
Insert the blade.