Setup guide

5. Installing the Ink Cartridges
46
2. Clean the print heads using the SOL INK cleaning cartridge.

Check the selected ink mode.
<When the selected ink mode is enabled>
Press
.
<When an incorrect ink mode is enabled>
Switch off the sub power.
Again carry out the procedure on page 43, "Selecting the Ink Mode."

Make sure the drain bottle is installed.
Press
.
w
Insert the SOL INK cleaning cartridges into slots 1, 2, 3, and 4.

When this screen appears, pull out the SOL INK cleaning
cartridges.
Insert the SOL INK cleaning cartridges you pulled out into
slots 5 and 6.
SELECT INK TYPE
ECO‑UV CMYKGlGl
SELECT INK TYPE
ECO‑UV CMYKWW
SELECT INK TYPE
ECO‑UV CMYKGlW
SELECT INK TYPE
ECO‑UVS CMYKWW
INSTALL
DRAIN BOTTLE
SET CL-LIQUID
1 2 3 4
FILLING INK...
>>
REMOVE CL-LIQUID
1 2 3 4
SET CL-LIQUID
5 6
FILLING INK...
>>>>
ECO-UV gloss/gloss mode
ECO-UV white/white mode
ECO-UV gloss/white mode
ECO-UVS ink mode