Setup guide
41
5. Installing the Ink Cartridges
Ink Mode
For LEC-540, the ink mode must be selected based on the types of ink to be used.
P. 43 "Selecting the Ink Mode"
ECO-UV gloss/gloss mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.
ECO-UV white/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two white ink cartridges.
ECO-UV gloss/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge and one
white ink cartridge.
ECO-UVS ink mode
This mode uses cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink cartridges.
Filling with Ink for the First Time
When installing ink cartridges for the rst time, clean the print heads with the cleaning solution, and then ll
with ink of each color. This operation requires four SOL INK cleaning cartridges.
*For SOL INK cartridges and ink cartridges, be sure to use new ones.
*Never, under any circumstances, use anything other than the specied type of ink or cleaning uid.
* You can switch the ink type after lling with ink although there are some restrictions. See “Switching the Ink
Type” in User’s Manual for more information.
Afxing the Cartridge-slot Labels
Procedure
Open the ink cartridge cover.
Hold the knob.
Knob