Setup guide

3. Assembling and Installing

Step 8: Remove the Packing Materials

Tape and other packing materials are attached to the machine to protect it from vibration during transporta-

tion. When the installation is complete, remove these materials.

 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power

is switched on.

 Store the packing materials carefully, because they are needed again when transporting the machine for

relocation or the like.

The packing material

can be stored in the location shown in the gure. Fix it to the machine with the screw

previously attached to the under side of the machine.

Align with the two

tabs and secure in

place.

Under side of the

machine

Packing material

Peel off the tapes.

Remove

Peel off the tape.

Remove

Under side of the air intake box

Peel off the tapes.

Peel off the tape.