Setup guide

3. Assembling and Installing
28
Step 2: Mount the Machine
CAUTION
Unpacking and installation must be carried out by six or more persons.
Otherwise the machine or the stand may fall, resulting in injury.
Procedure

Place the machine on the stand.
Mount the machine aligning the holes on the under side of the machine with the projections on the top
of the stand.

Loosely tighten the bolts (in the 8 locations).
Fully tighten all the loosely-tightened bolts.
4 places
4 places
Washers
Washers
Under side of
the machine
Main unit
Align with the ttings on the stand.