Setup guide

3. Assembling and Installing
25
2. Attach the Rail Slider and the Arm to the Stand Legs.

Attach the arm to the rail slider.
Secure the arm with the arm retaining screw.

Align the slot on the rail slider with the tab on the stand leg.
Loosely tighten the bolts in the 2 location shown in the gure.
Loosely tighten the bolt on the stand leg (right) rst.
Fully tighten all the loosely-tightened bolts.
Please use the head-unit tool.
Orient this side
toward the rear.
Arm
Arm retaining screw
Rail slider
Line up the tab
with the slot.
Slot
Tab
Bottom surface
of the rail slider
Hexagonal
wrench
Bolt
Head-unit tool