Setup guide

8. Network Settings
58
2. Set the subnet mask.

Press .

Press twice.

Use to select the address number.
[Subnet mask] : 255.255.255.000
Note: For the subnet mask, make the setting the same value
as the one used by the computer. Here, "255.255.255.000" is
entered by way of example.

Press .

Repeat  and  to set the subnet mask.
When you've nished making the setting, press
.

Press .
Press
to go back to the original screen.
If you're using one computer and one machine, this completes the settings to make on the printer. Go
on to Step 3.
If setting the gateway address is required, then go on to the procedure following this one.
3. Set the gateway address.

From the screen 1. -  , press twice.

Press twice.

Use to select the address number.
[GATEWAY ADDR.] : 255.255.255.255
Note: For information about the value to enter for the
gateway address, consult your network administrator. Here,
"255.255.255.255" is entered by way of example.
NETWORK
SUBNET MASK
SUBNET MASK
000 . 000 . 000 . 000
SUBNET MASK
255 . 000 . 000 . 000
SUBNET MASK
255 . 000 . 000 . 000
SUBNET MASK
255 . 255 . 255 . 000
W 736 mm
SETUP SHEET
ROLL
NETWORK
GATEWAY ADDR.
GATEWAY ADDR.
000 . 000 . 000 . 000
GATEWAY ADDR.
255 . 000 . 000 . 000