Setup guide

6. Installing the Ink Cartridges (LEC-330)
50
2. Clean the print heads using the SOL INK cleaning cartridge.

Check the selected ink mode.
<When the selected ink mode is enabled>
Press
.
<When an incorrect ink mode is enabled>
Switch off the sub power.
Again carry out the procedure on page 47, "Selecting the Ink
Mode."

Make sure the drain bottle is installed.
Press
.

Insert the SOL INK cleaning cartridges into slots
1, 2, 3, and 4.

 Pull out the SOL INK cleaning cartridges.
 Insert the SOL INK cleaning cartridges you pulled
out into slots 5 and 6.
SELECT INK TYPE
ECO‑UV CMYKGlGl
SELECT INK TYPE
ECO‑UV CMYKWW
SELECT INK TYPE
ECO‑UV CMYKGlW
SELECT INK TYPE
ECO‑UVS CMYKWW
INSTALL
DRAIN BOTTLE
SET CL-LIQUID
1 2 3 4
FILLING INK...
>>
REMOVE CL-LIQUID
1 2 3 4
SET CL-LIQUID
5 6
FILLING INK...
>>>>
ECO-UV gloss/gloss mode
ECO-UV white/white mode
ECO-UV gloss/white mode
ECO-UVS ink mode