Manualshelf

Setup guide

ManualsBrandsRoland ManualsComputer equipmentLEC-300A
41424344454647484950
6. Installing the Ink Cartridges (LEC-330)
47
Selecting the Ink Mode
Be sure to make the selection of the ink mode when switching on the power for the rst time.
Procedure
Close the front cover.
If the main power switch is on, then switch it off.
<ECO-UV gloss/gloss mode>
Hold down and ,switch on the main power switch.
When a message appears on the display screen, release the operation-
panel buttons.
<ECO-UV white/white mode>
Hold down and ,switch on the main power switch.
When a message appears on the display screen, release the operation-
panel buttons.
<ECO-UV gloss/white mode>
Hold down and ,switch on the main power switch.
When a message appears on the display screen, release the operation-
panel buttons.
<ECO-UVS ink mode>
Hold down and ,switch on the main power switch.
When a message appears on the display screen, release the operation-
panel buttons.
Continued on the next page
SET INK MODE
GLOSS INK
SET INK MODE
WHITE INK
SET INK MODE
CMYKGlW
SET INK MODE
ECO-UVS WW