Setup guide
45
6. Installing the Ink Cartridges (LEC-330)
Ink Mode
In the case of LEC-330, you need to select the ink mode in accordance with the ink type.
? P.47, "Selecting the Ink Mode"
ECO-UV gloss/gloss mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.
ECO-UV white/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two white ink cartridges.
ECO-UV gloss/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge and
one white ink cartridge.
ECO-UVS ink mode
This mode uses cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink cartridges.
Filling with Ink for the First Time
When installing ink cartridges for the rst time, clean the print heads with the cleaning solution,
and then ll with ink of each color. This operation requires four SOL INK cleaning cartridges.
* For SOL INK cartridges and ink cartridges, be sure to use new ones.
* Never, under any circumstances, use anything other than the specied type of ink or cleaning
uid.
* You can switch the ink type after lling with ink although there are some restrictions. See
“Switching the Ink Type” in User’s Manual for more information.
Afxing the Cartridge-slot Labels
Procedure
Open the ink cartridge cover.
Hold the knob.
Knob