Setup guide

3. Assembling and Installing
28

Mount the paper tube and secure the arm in place.
First, t the paper tube securely onto the end cap on the same side as the right stand leg. Next,
press the end cap on the same side as the arm into the paper tube and securely t the end cap
into the paper tube. Finally, secure the arm in place using the arm retaining screw.
For the paper tube, use the included item. Using something other than the included item may
result in spinning without traction or other problems that impede media take-up.
Tighten the screw while
pressing down from above.
Fit onto this securely.
End cap
End cap
Paper
tube
Fit onto this
securely.
Paper tube
Arm