Setup guide
1. Installation Environment
19
Temperature and Humidity
Maintain the specied temperature and humidity even when the machine is not in use. If temperatures
are too high or too low, it may cause malfunction.
Unsuitable Installation Sites
Following locations can cause malfunction or poor printing quality.
Locations subject to large uctuations in temperature or humidity
Locations subject to shaking or vibration
Locations where the oor is tilted, not level, or unstable
Dusty locations
Locations exposed to direct sunlight or near air-conditioning or heating
equipment
Locations exposed to water or moving air
Locations exposed to considerable electrical or magnetic noise, or other
forms of electromagnetic energy
During operation: Temperature 20 to 32˚C (68 to 90˚F), relative humidity 35 to
80% (no condensation)
During non-operation: Temperature 5 to 40˚C (41 to 104˚F), relative humidity 20
to 80% (no condensation)