Specifications

Chapter 2 Getting Ready

2-3 Printer Preparations

Making the Printer Settings and Loading Media

When Using Transparent Media

When you're using transparent media, make the necessary printing settings on the printer and load the media accord-

ingly.

Procedure



Press and make the following settings.

[EDGE DETECTION] to "DISABLE".



Load transparent media into the printer.

 When the media you are loading into the printer warps or partially oats from the platen, load it into the printer so

that its front end goes about 20 cm (8 in.) from the starting edge of the print area.

 Be sure to use the media clamps when you load media.

When Using Media Other Than Transparent Media

Load the media using the method described in the LEC-300 User's Manual.