Owner`s manual

About the Screen
9
How the Screens Are Organized
Setup screen display area
Access buttons for each screen
Press these buttons to access the corresponding
screen.
Button Screen
Studio Set Mixer page 11
Part View page 12
MOTIONAL
SURROUND
page 13
SuperNATURAL Synth
Tone Edit
page 14
Loading sound data into EXPANSION virtual slots
[PART] buttons
These buttons switch the current part (the part
that’s selected).
When you tap a part number, its frame will turn
orange and it will become the current part.
STUDIO SET
Shows the studio set name.
Tap “
” to see a list of studio sets.
TONE
Shows the tone of the current part.
TYPE
Shows the tone type.
NAME
Shows the tone name.
Tap “
” to see a list of tones.
[Setup] button
Accesses the setup screen of
INTEGRA-7 Editor for iPad.
[PREVIEW] switch
If you move this switch downward, the switch will
be held and the preview will continue playing.
[READ] button
When you tap this button, the current settings for
the INTEGRA-7’s parameters will be read in, updating
all parameters within INTEGRA-7 Editor for iPad.
When you connect the INTEGRA-7 sound module
to INTEGRA-7 Editor for iPad, tap the [READ] button
rst to synchronize the settings.
[WRITE] button
Press this button to access a screen that lets you
save the settings of INTEGRA-7 Editor for iPad as an
INTEGRA-7 Studio Set or Tone.
Drag
[LOAD] button
EXPANSION
SOUNDS
EXPANSION
Virtual Slots
Drag a sound data graphic
from EXPANSION SOUNDS
into the EXPANSION virtual
slot, and then tap the
[LOAD] button.
MIDI indicator
This will light when MIDI messages are being
transmitted or received.