Owner`s manual

4
Settings in INTEGRA-7 Editor for iPad
Tap the [ ] button in the upper-right part of the screen in INTEGRA-7 Editor for iPad.
The setup screen will appear.
Parameter Value Explanation
Mode Select
Demo Choose this when you want to try out operation without connecting the INTEGRA-7.
Normal
The app will work in connection with the INTEGRA-7.
In most cases, you’ll want to use the app in Normal mode.
Motional Surround View Type
Detail
Shows a graphic for the instrument whose part icon is selected in the MOTIONAL SURROUND
screen.
Simple Shows a simple indication of the part icons in the MOTIONAL SURROUND screen.
Motional Surround Direct Jump OFF, ON
If this is on, you can specify the spatial position of the current part simply by touching the spatial
position area.
Device ID 17–32
Set this to the same value as the Device ID in “INTEGRA-7 settings”
Checking the Device ID
Note the value shown under [MENU]
“System” “MIDI” tab Device ID.
MIDI Device Selects the MIDI device.
Manual Tap this to view the operating manual (this document).
Version Shows the version of INTEGRA-7 Editor for iPad that you’re using.