User Manual
Table Of Contents
- Read This First
- Main Specifications
- Easy Quick Guide
- Panel Descriptions
- Operation Guide
- Selecting a Tone
- Adjusting the Overall Volume
- Adding Reverberation to the Sound (Ambience)
- Adjusting the Brightness of the Sound (Brilliance)
- Making Various Settings (Function Mode)
- Transposing the Pitch (Transpose)
- Changing the Playing Feel of the Keyboard (Key Touch)
- Dividing the Keyboard for Two People (Twin Piano)
- Playing Different Tones with the Left and Right Hand (Split Play)
- Creating Your Own Piano Tone (Piano Designer)
- Saving Your Performance Settings (Registration)
- Layering Two Sounds (Dual Play)
- Display
- Using the Bluetooth Function
- Selecting an Item/Editing a Value
- Sounding the Metronome
- Selecting a song
- Playing Back or Recording
- Disabling the Buttons (Panel Lock)
- Selecting the Part(s) to Play (Part Mute)
- Selecting a Tone
- Advanced Operation
- Recording Your Performance
- Recording
- Deleting a Saved Song (Delete Song)
- Copying a Saved Song (Copy Song)
- Renaming a Song (Rename Song)
- Creating Your Own Piano Tone (Piano Designer)
- Saving Your Performance Settings (Registration)
- Recalling a Registration
- Saving Current Settings into a Registration
- Saving a Registration Set (Registration Export)
- Loading a Saved Registration Set (Registration Import)
- Loading/Saving Piano Setups
- Saving Piano Settings (Piano Setup Export)
- Loading Piano Settings (Piano Setup Import)
- Convenient Functions
- Initializing the Memory (Format Media)
- Restoring the Factory Settings (Factory Reset)
- Using the Bluetooth® Functionality
- Here’s What You Can Do
- Listening to Music Through the Piano’s Speakers
- Using the Piano with an App
- Using the Pedals to Turn Pages on a Music Score App
- Various Settings
- Making Various Settings (Function Mode)
- Basic Operations in Function Mode
- Matching the Pitch with Other Instruments (Master Tuning)
- Changing the Tuning Method (Temperament)
- Specifying the Tonic Note (Temperament Key)
- Adjusting the Song (SMF) Volume (Song Volume SMF)
- Adjusting the Song (Audio) Volume (Song Volume Audio)
- Adjusting the Volume of an Audio Playback Device or Bluetooth Audio (Input/Bluetooth Vol.)
- Specifying the Keyboard’s Tone When Playing Back a Song (SMF Play Mode)
- Selecting the Format for Recording (Recording Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Changing the Effect of the Pedal (Left Pedal)
- Using a Pedal to Switch Registrations (Reg. Pedal Shift)
- Adjusting the Brightness of the Display (Display Contrast)
- Specifying a Maximum Volume (Volume Limit)
- Outputting Sound from Both an External Speaker and the Internal Speakers (Speaker Auto Mute)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch)
- Changing the Language Displayed in the Screen (Language)
- Making the Power Automatically Turn Off After a Time (Auto Off)
- Saving Settings Automatically (Auto Memory Backup)
- Connecting Your Equipment
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
5
°
Panel Descriptions
Pedal
[L] button
To turn the power on, press the [L]
button.
To turn the power o, long-press the [L]
button.
* Never disconnect the power cord while the screen
indicates “Don’t disconnect the power.”
* Before turning the piano on/o, always be sure to turn the volume down.
Even with the volume turned down, you might hear some sound when
switching the piano on/o. However, this is normal and does not indicate
a malfunction.
Headphone Hook
Whenever you are not using the headphones, you can
hang them on the headphone hook.
↑これは使わないでOKだとおも
います。
* Don’t hang anything other than headphones on this hook, and don’t
apply excessive force to it. Doing so may damage the headphone hook.
Bottom Panel
Connect headphones or an audio player to these jacks (left side).
You can use a USB cable to connect the piano to a computer, or
connect a USB ash drive (rear).
page
25
Adjusting the adjuster
Depending on the conditions of use or the environment in
which the piano is placed, the adjuster might move upward
over time, causing an abnormal sound to be heard when you
press the pedal. If this occurs, adjust the adjuster.
Adjustment method
Lower the adjuster located below
the pedal board, adjusting it so that
it contacts the oor. If the piano
is placed on carpet, lower the adjuster a little more so that it
pushes slightly against the oor.
Front Panel
To operate the piano, use the buttons to select an
item shown in the screen.
page
6
* When operating the pedal, take care not to pinch your ngers between the moving part and the
body of the unit. Pay special attention to this when using the unit where children are present.
Concerning the Auto O function
The power to this unit will be turned o automatically after
a predetermined amount of time has passed since it was last
used for playing music, or its buttons or controls were operated
(Auto O function).
If you do not want the power to be turned o automatically,
disengage the “Auto O” function (p. 24).
5 Any settings that you are in the process of editing will be lost
when the power is turned o. If you have any settings that you
want to keep, you should save them beforehand.
5 To restore power, turn the power on again.
Damper Pedal
Use this pedal to sustain the sound. While this pedal is held down, notes will be sustained for an
extended time even if you release your ngers from the keyboard.
This reproduces the following features of an acoustic piano’s damper pedal.
5 A change in feel as you press the pedal, initially light but becoming heavier as you continue
pressing
5 Richness and spaciousness added by other strings sympathetically resonating with the sound
of the notes you play
5 The distinctive decay added by “half-pedaling,” in which the core of the sound ends quickly
while leaving only a rich spaciousness and resonance
Sostenuto Pedal
The notes you are pressing when this pedal is depressed will be sustained.
Soft Pedal
This pedal is used to make the sound softer. Playing with the soft pedal depressed produces a
sound that is not as strong as when otherwise played with the equivalent strength. This is the
same function as the left pedal of a grand piano. The softness of the tone can be varied subtly by
the depth to which you press the pedal.










