User Manual
Table Of Contents
- Look What You Can Do!
- Contents
- Operation Guide
- Panel Descriptions
- Before You Play
- Performing
- Practicing
- Practicing with the Metronome
- Practicing with a Song
- Recording the Song You’re Practicing
- SMF Recording
- Overdubbing a Recorded Song
- Converting a Song Recorded as an SMF to Audio
- Audio Recording
- Transposing a Song for Easier Performance (Audio Transpose)
- Enjoying Karaoke with an Audio File (Center Cancel)
- Burning an Audio Recording of a Song (WAV file) to a CD
- Saving a Song with the Name You Specify
- Renaming a Song
- Convenient Functions
- Making the Power Automatically Turn Off After a Time (Auto Off)
- Retaining the Settings Even After Power-off (Memory Backup)
- Restoring the Factory Settings (Factory Reset)
- Copying a Saved Song (Copy Song)
- Deleting a Saved Song (Delete Song)
- Initializing the Memory (Format Media)
- Disabling the Buttons (Panel Lock)
- About the Wireless LAN Function
- Basic Connection Method (Connect by WPS)
- Wireless LAN Function Settings
- Various Settings (Function Mode)
- Applying a Headphones 3D Ambience Effect to the Piano Sound (Headphones 3D Ambience)
- Adjusting the Dual Play Volume Balance (Dual Balance)
- Matching the Pitch with Other Instruments (Master Tuning)
- Changing the Tuning Method (Temperament)
- Specifying a Song’s Tonic (Temperament Key)
- Producing Sympathetic Resonance When You Press the Damper Pedal (Damper Resonance)
- Producing the Resonance of the Strings When the Keys Are Played (String Resonance)
- Playing Sounds When the Keys Are Released (Key Off Resonance)
- Adjusting the Metallic Sound That Occurs When You Play a Note (Dynamic Harmonic)
- Adjusting the Sympathetic Resonance of the Grand Piano Body (Cabinet Resonance)
- Adjusting the Clarity of Individual Notes in a Chord (Soundboard Behavior)
- Using a Piano’s Unique Tuning (Stretch Tuning)
- Adjusting the volume of each individual key (Note Volume)
- Adjusting the tonal character of each individual key (Note Character)
- Adjusting the Volume of an Audio Playback Device (Input Volume)
- Playing Back an Audio File with Its Central Sound Minimized (Center Cancel)
- Transposing an Audio File (Audio Transpose)
- Specifying What the Transpose Will Affect (Transpose Mode)
- Changing the Pitch of the Tone in Octave Steps (Octave Shift)
- Selecting the Format for Recording (Recording Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Channel)
- Saving an Internal Song (Save Song)
- Copying a Saved Song (Copy Song)
- Deleting a Saved Song (Delete Song)
- Initializing the Memory (Format Media)
- Changing the USB Driver Settings (USB Driver)
- Changing the USB Flash Drive Setting (USB Memory Mode)
- Controlling Video Equipment (Visual Control Mode)
- Specifying the Visual Control Channel (Visual Control Channel)
- Wireless LAN Function Settings
- Specifying the Maximum Volume (Volume Limit)
- Changing the Language Displayed in the Screen (Language)
- Making the Power Automatically Turn Off After a Time (Auto Off)
- Storing Your Settings (Memory Backup)
- Restoring the Factory Settings (Factory Reset)
- Applying a Headphones 3D Ambience Effect to the Piano Sound (Headphones 3D Ambience)
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- Main Specifications
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- About the Ivory Feel Keyboard
- Assembling
- Index
Convenient Functions
Wireless LAN Function Settings
You can view or edit the wireless settings.
Basic Operation
1. While holding down the [Song Balance] button, press the
[AB Repeat] button.
2. Press the [ ] [ ] (Slow/Fast) buttons to select the
“Wireless,” then press the [Song] button.
3. Press the [ ] [ ] (Slow/Fast) buttons to select menu,
then press the [Song] button.
Menu Explanation
Status This shows the wireless LAN status.
Connect Connect to a wireless LAN access point.
Option Make settings for Wireless ID or Ad-Hoc mode (p. 47).
In the explanations in this Chapter, procedures will be
indicated using arrows, like this: “Wireless” g “Status.”
Status Indication
This shows the wireless LAN status.
1. Select “Wireless” g “Status.”
The status screen will appear.
Display Explanation
Signal level:
Strong
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The identier (name) of the connected wireless LAN
access point is shown.
Signal level:
Middle
Signal level:
Weak
Not Con
The wireless USB adapter is inserted, but not
connected to a wireless LAN access point.
NotAvail The wireless USB adapter is not inserted.
HP506
SSID
Ad-Hoc mode (p. 47).
The Ad-Hoc SSID is shown. Press the [
] (Fast)
button to display the Ad-Hoc key.
For details, refer to “What is Ad-Hoc mode?” (p. 47).
2. Press the [ ] (Fast) button to display the IP address.
Connecting to a Wireless LAN Access
Point That You Select (Select AP)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1. Select “Wireless” g”Connect” g “Select AP,” then press the
[Song] button.
The Select Access Point screen will appear.
An “*” symbol is shown for the currently-connected wireless LAN
access point.
2. Press the [–] [+] button to choose the wireless LAN access
point to which you want to connect, and press the [Song]
button.
• You will be connected to the selected wireless LAN access point.
• If you’re using this wireless LAN access point for the rst time,
you’ll proceed to the authorization (PASS) screen.
• If t
his is a wireless LAN access point to which you have
connected in the past, just press the [Song] button and you’ll be
connected. Once successfully connected, “Success” will appear.
Authorization screen (PASS)
3. Enter the security code (passphrase) of your wireless LAN
access point, and press the [Song] button.
How to enter characters
Use the [
] [ ] (Slow/Fast) buttons to select the position at
which you want to specify a character. Use the [–] [+] buttons to
change the character.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, “Completed” will appear.
* If you fail to connect, refer to “Troubleshooting” (p. 55).
4. Press the [Song Balance] or [AB Repeat] button to exit
Function mode.
46