User`s manual

94
4 User's Reference
Network Interface Specifications
* For detailed information about the network interface, take a look at the "Roland-PrintServer User Manual."
Control Area
RJ-45 (Ethernet) connector
10Base-T Ethernet network cable specifications
100Base-TX Ethernet network cable specifications
1. Button
2. Green, ready mode LED
3. Yellow LED receive data and error indicator
4. RJ-45 connector for 100Base-TX and 10Base-T
5. Green, link LED
Pin Assignment Input or output
1 RX+ (Receive) IN
2 RX- (Receive) IN
3 TX+ (Transmit) OUT
4- -
5- -
6 TX- (Transmit) OUT
7- -
8- -
Data Values
Max. cable lenght 100 m
Cable type S/UTP Type "category 5"
Impedance 100 Ohm
Connector type RJ-45
Data Values
Max. cable lenght 100 m
Cable type S/UTP Type "category 5"
Impedance 100 Ohm
Connector type RJ-45