User`s manual

4 User's Reference

Settings for Windows NT 4.0

The following procedure describes how to set the IP address for

the print server.

1) From the [Start] menu, point to [Programs] and choose

[Command Prompt].

2) Run this: arp -s <IP address> <hardware address>

For the IP address, specify the IP address for the print

server you decided on in "1 Confirm the IP addresses of

the computer and the print server."

For the hardware address, specify the hardware address for

the print server you verified in "3 Verify the hardware

address for the print server."

Here, enter arp -s 192.168.0.123 00-c0-eb-00-01-ff as an

example, then press the [ENTER] key.

3) Run this: ping <IP address>

For the IP address, specify the IP address for the print

server you decided on in "1 Confirm the IP addresses of

the computer and the print server."

Here, enter ping 192.168.0.123 as an example, then press

the [ENTER] key.

This completes the setting of the IP address for the print server.

Settings for Macintosh

In the included "Roland-PrintServer for Macintosh Users," follow the instructions in "Setting the IP Address for the Print Server and

Verifying the Network Connection" and make the settings.

* Output to the FJ-500/400 is made via Roland COLORCHOICE

. The output destination for use in a network environment is made

with Roland COLORCHOICE