User`s manual

56
3 Maintenance
When the display shown in the figure appears, discard
the discharged ink in the drain bottle.
* Be sure to discard the discharged ink.
Attempting to replace the ink while discharged
ink remains may cause discharged ink to
overflow from the bottle.
5
O = Orange, G = Green, c = Light Cyan, m = Light Magenta,
K = Black, C = Cyan, M = Magenta, Y = Yellow
EMPTY
DRAIN TANK
Attach the drain bottle and press the [ENTER] key.
The colors for the ink cartridges to pull out flash
according to the type of ink you are changing.
6
REMOVE CARTRIDGE
[OGcmKCMY]
After you have pulled out all the ink cartridges whose
colors are flashing, ink replacement starts. Follow the
messages on the display to carry out the procedure.
If you are replacing all eight ink colors, then when you
finish replacing the first four colors, the display returns
to the screen shown in step 6.
Follow the messages on the display to replace the
remaining four colors.
7
SET CLEANING
LIQUID[OGcmKCMY]
Insert a cleaning cartridge into the ink cartridge port
for the flashing color.
REMOVE CLEANING
LIQUID[OGcmKCMY]
Remove the cleaning cartridge from the ink cartridge
port for the flashing color.
Messages appearing during ink replacement
When the display shown in the figure appears, insert
the ink cartridge to be newly used.
The colors for the ink cartridges to insert flash
according to the type of ink you are changing.
* When set to [PIG&DYE] (four-color pigment ink
and four-color dye-based ink), then while facing
the back of the machine, insert the dye-based
ink cartridges in the four places on the left and
the pigment ink cartridges in the four places on
the right.
8
SET CARTRIDGE
[OGcmKCMY]
When the display shown in the figure appears, ink
replacement is finished.
Press the [SETUP] key to go back to the top menu.
9
CHANGE INK SET
PIG. 8 PIG. 8