User`s manual

55
3 Maintenance
3-4 Changing the Type of Ink
When changing the type of ink in use, follow the steps below to
replace the ink.
Ink replacement requires four optionally available cleaning
cartridges.
The amount of cleaning fluid used varies according to the area
cleaned.
You can perform cleaning four times
per cleaning cartridge.
* Due to the structure of the head,
twice as much cleaning fluid is
consumed as for other areas.
You can perform
cleaning seven times
per cleaning cartridge.
Press the [MENU] key and [ ] key to make the
following screen appear on the display.
1
Press the [ ] key to make the following screen
appear on the display.
2
INK CONTROL
EMPTY MODE
MENU
INK CONTROL
Use the [ ] key to select [CHANGE INK SET], then
press the [
] key.
3
INK CONTROL
CHANGE INK SET
Use the [ ] and [ ] keys to select the new type of ink
to use, then press the [ENTER] key.
* When you are changing from [PIG. 8] (eight-color
pigment ink) to something else, turn over the
plates for the ink-cartridge ports. For more
information, refer to "2-1 Installing Ink Cartridges"
-- "Before You Install the Ink Cartridges" and "Turn
Over the Plate."
4
CHANGE INK SET
PIG. 8 DYE 4
- PIG. 8: Pigmented ink (orange, green, light cyan, light
magenta, black, cyan, magenta, and yellow)
- PIG. 4: Pigmenedt ink (black, cyan, magenta, and yellow -
two sets)
- DYE 4: Dye-based ink (black, cyan, magenta, and yellow -
two sets)
- PIG&DYE: Dye-based ink (black, cyan, magenta, and yellow)
and pigmented ink (black, cyan, magenta, and yellow)