User`s manual

54
3 Maintenance
Screws (at two places)
27
Close the front cover.
28
Turn on the main power switch at the side of the unit,
then press the [POWER] key to switch on the sub power.
26
Attach the cover.
Switch to "I"
The POWER LED lights up
29
Load the material.
30
Press the [CLEANING] key, then press the [ ] key
to display the screen shown in the figure. Press the
[ENTER] key, head cleaning starts.
CLEANING
BOTH HEADS
31
When head cleaning ends, press the [ ] key to display
the screen shown in the figure. Press the [ENTER] key
to start the printing test.
CLEANING
TEST PRINT
32
Examine the printing test results to make sure all dots are
printed attractively.