User`s manual

53
3 Maintenance
23
Use the tweezers to press down the sponge.
Slowly press it downward until it makes contact.
Use the tweezers to press
down the sponge.
24
Return the carriage to standby position.
If allowed to stand with the carriage remaining away from standby position for a prolonged period, problems
such as drying-out of the printing heads or dot drop-out during printing may occur. When finished cleaning,
promptly return the carriage to standby position.
NOTICE
25
Make sure there is a sponge under the hook.
If the sponge is not at the location shown in the figure
(OK), repeat steps 22 and 23.
Move inward until flush.