User`s manual

51
3 Maintenance
18
Wipe away any grime adhering to the edges of the left-
hand and right-hand rubber caps. Use the tip of the
cleaning stick to scrape off grime.
Be sure to use one of the included cleaning sticks.
If no grime is present, do not touch the sponges inside the rubber caps.
NOTICE
When removing grime adhering to the sponge inside a rubber cap, touch the sponge gently with the tip of the
cleaning stick to pick up the grime. Rubbing forcefully may damage the surface of the sponge.
Rubber caps (black)
20
Wiper
Top edge
Rubbing the felt surface with too much force may make the surface fuzzy. Remove grime by stroking gently
several times with the tip of the cleaning stick.
NOTICE
Rubber surface
Wiper
19
Wipe away any ink buildup on the valve sides (four
places).
Valve sides
Clean the wiper areas (two places on the left and right).
When viewed from the front, the wiper has a rubber
surface on its right-hand side and a felt surface on its
left-hand side. Clean mainly the rubber surface and the
top edge.
Felt surface