User`s manual

39
2 Basic Operation
If the SETUP LED is lighted, press the [SETUP] key.
Hold down for about 1 second.
1
Power Off in Daily Operation
Move the sheet loading lever toward the back of the
unit and remove the material.
2
The SETUP LED goes out
3
Press the [POWER] key to switch off the power.
The carriage moves to the standby position and the head
is capped.
If the carriage is already at the standby position, no
movement takes place.
The POWER LED goes out
Standby position
After carrying out "Power Off in Daily Operation," turn
off the main power switch.
1
When Not in Use for a Prolonged Period...
Do not switch off the main power with the printing head in an uncapped state (i.e., while the carriage is on the
platen).
If you leave the carriage uncapped for a long time, doing so may result in clogging of the printing head, making
it unusable.
Before switching off the main power, be sure to press the [POWER] key to switch off the sub power for the FJ-
500/400.
NOTICE
* If the unit will be out of use for a month or longer, follow "3-8 When Moving the Unit..." to wash the printing heads. Head washing
requires four optionally available cleaning cartridges.
2
Unplug the power cord from the electrical outlet.
Sheet loading lever
Carriage
Switch to "O"