User`s manual

33
2 Basic Operation
Setting the printing area in the left-right direction (the direction of carriage movement)
* This can be set only at the time of material setup.
Press the [MENU] key and [ ] key to display the
screen shown in the figure.
1
MENU
PRINT AREA
Press the [ ] key to display the screen shown in the
figure.
2
PRINT AREA
RIGHT EDGE
Press the [ ] key to display the screen shown in the
figure.
When you do this, the carriage moves to the right edge
of the printing area.
3
RIGHT EDGE
SET
Use the [ ] and [ ] keys to move the marker at the
right edge of the carriage to the location that you want to
make the right edge of the printing area. Press the
[ENTER] key to lock in the setting the right-hand edge
with an audible beep.
4
Right-hand edge
of the material
Right-hand edge of
the printing area
Marker
PRINT AREA
LEFT EDGE
Press the [ ] key to display the screen shown in the
figure.
5
Press the [ ] key to make the following screen
appear on the display.
When you do this, the carriage moves to the left edge
of the printing area.
6
LEFT EDGE
SET
Left-hand edge of
the printing area
Left-hand edge
of the material