User`s manual

21
2 Basic Operation
2-3 Loading the Material
Load roll material at the proper
position.
Otherwise the roll may
fall, resulting in injury.
When closing the front cover, be
careful not to pinch your fingers.
Doing so may result in injury.
Before loading roll material, be sure to install the media guide.
NOTICE
Line up the ridges and grooves.
(4)
(3)
Media flange
76.2 mm
(3 in.)
50.8 mm
(2 in.)
Media flange
(2)(1)
Flange retaining pin
3
Line up with the core diameter of the loaded roll material and refit the left- and right-hand media flanges.
Open the front cover.
2
Remove the media cover.
1
Loading Roll Material
Acceptable material widths
FJ-500 210 to 1371 mm (8-5/16 to 54 in.)
FJ-400 210 to 1117 mm (8-5/16 to 44 in.)
Media cover