User`s guide

36
SONAR REAC Recording System User’s Guide
•
•
•
•
•
•
Disabling the VS-700C Control Surface plug-in
If you are using the VS-700 surface, use the following procedure to disable the VS-700 control surface plug-
in:
1. On the Edit menu, click Preferences to open the Preferences dialog.
2. Click Control Surfaces on the left side of the window.
3. Select VS-700 and click the Delete button.
4. Click Apply.
Note: When the VS-700C control surface plug-in is disabled, almost all controls on VS-700C, such as
knobs, faders and buttons, are unavailable while recording with the REAC system.
Before mixing the recorded data, be sure to enable the VS-700C control surface plug-in again.