User`s guide

PC setup
31
•
•
•
•
•
•
6. Select the appropriate SYNC SOURCE and DIGITAL 1 INPUT to which the DIGITAL Audio Clock is
connected.
7. Look at the SYNC LED on the VS-700R front panel to confirm that the VS-700R synchronizes to the
REAC System:
 If the SYNC LED corresponding to DIGITAL INPUT is lit, the VS-700R synchronizes.
 If the SYNC LED corresponding to DIGITAL INPUT blinks, the VS-700R does not synchronize. In this
case, check the digital audio clock connection, sample rate of both devices, REAC system and
VS-700R.
8. Close VS-700R IO Editor.
Note: You must apply these SYNC SOURCE settings each time you turn on the VS-700R.