User`s guide

30
SONAR REAC Recording System User’s Guide
•
•
•
•
•
•
VS-700 setup
1. Connect the power cord to the VS-700R.
2. Connect the VS-700R to the PC using a USB cable.
3. Open the Start screen.
Open the Windows Control Panel.
4. Select display method from Large icons or Small icons.
5. Click the Cakewalk VS-700 icon to open the Driver Setting dialog.
6. Move the Audio Buffer Size slider to the Max position
7. Click OK to close the Driver Settings dialog.
8. Set the Sample Rate switch to the same rate as the REAC System.
9. Turn the VS-700R off and back on again
To configure the SYNC SOURCE setting for the VS-700R
1. Connect the VS-700R to the PC and turn on the device.
2. In the Start screen, click VS-700R IO Editor to start VS-700R IO Editor.
From the Start menu, point to All Programs and click VS-700R IO Editor to open the
VS-700R IO Editor.
3. On the Setup menu, click Setup MIDI Device.
4. Under VS-700R I/O, select IO (VS-700) in the Input and Output drop-down menus.
5. Click OK to close the Set Up MIDI Devices dialog.