User`s guide
Table Of Contents
- Table of Contents
- Hardware and software requirements
- Hardware setup
- Software installation
- PC setup
- Troubleshooting
PC setup
29
•
•
•
•
•
•
QUAD-CAPTURE / OCTA-CAPTURE setup
1. If you're using the OCTA-CAPTURE, connect the power supply to the OCTA-CAPTURE.
2. Connect the QUAD-CAPTURE/OCTA-CAPTURE to the PC using a USB cable.
3. Open the Start screen.
Open the Windows Control Panel.
4. Select display method from Large icons or Small icons.
5. Click the QUAD-CAPTURE/OCTA-CAPTURE icon to open the Control Panel.
6. On the Driver menu, click Driver Settings to open the Driver Settings dialog.
7. Move the Audio Buffer Size slider to the Max position.
8. Clear the Reduce CPU load check box.
9. Click Close to close the Driver Settings dialog.
10. Set the Digital in System Settings of QUAD-CAPTURE/OCTA-CAPTURE to AUTO.
11. Connect coaxial cable from REAC system to COAXIAL input of QUAD-CAPTURE/OCTA-CAPTURE.