User`s guide

26
SONAR REAC Recording System User’s Guide
•
•
•
•
•
•
Network Adapter Setting
1. Access the Control Panel ( page 19).
2. Switch to the Category view, and click System and Security.
3. In the System section, click Device Manager, and then click the triangle symbol at the left of Network
Adapters.
4. Right-click the Ethernet Controller icon to which the REAC system is connected, then select Properties
on the pop-up menu.
The Properties dialog appears.
5. Click the Advanced (or Power Management) tab.
6. Make sure the “Wake On Lan” function is disabled (for example, in the Property list, select Wake-up
capabilities, Wake up function, Wake-On-Lan function, etc. and select None or It is not in the Value
list).
7. Click OK to close the Properties dialog.
8. Close all other open windows.