User`s guide

22
SONAR REAC Recording System User’s Guide
•
•
•
•
•
•
Network setting
First, disable the following devices/ports using the BIOS setup or detach the devices from the PC:
• Second Ethernet (LAN) port (* The REAC recording system needs only one port)
• Wireless LAN device
• Modem device
Please refer to your computer's documentation for information about disabling devices/ports.
1. Open the Windows Control Panel.
2. Under Network and Internet, click View network status and tasks.
3. Click Change adapter settings on the left side of the window.
4. If there is more than one connection, disable all of connections except one Ethernet or Local Area
Connection, which is used to connect to the REAC System.
5. Right-click the Ethernet or Local Area Connection icon and click Properties on the pop-up menu.
If the User Account Control dialog appears, click Yes.
Note: The Ethernet (LAN) port should be used exclusively for REAC recording. This port should not be
used for internet or networking. If any data packets are transferred via Ethernet, the glitch noise or pop
noise will be occur in the REAC system recording.
How to disable the connections.
1. Right-click the connection icon that you want to disable.
2. Choose Disable on the pop-up menu.