User`s guide

PC setup
19
•
•
•
•
•
•
PC setup
Please follow the instructions to optimize your PC for this recording system. You will only need to make these
changes once.
To Open the Control Panel
1. On the Start screen, click the Desktop.
2. Move the mouse pointer to the upper right or lower right corner of the screen to display the charms.
3. Click Settings and display the “Setting charms.”
4. In “Setting charms,” click Control Panel to open the “Control Panel.”
Important: Before configuring the computer, please make sure that you have completed the following
steps:
• Make sure you have connected the Digital Audio Clock from the REAC System to the audio interface.
• Make sure you have already installed the following software and drivers:
 SONAR X2 PRODUCER / STUDIO / ESSENTIAL and any available updates.
 The REAC Driver and the REAC Driver version 2.0.
 The QUAD-CAPTURE / OCTA-CAPTURE / FA-66 / VS-700 Driver.
• If you are using the VS-700R, make sure VS-700R IO Editor is installed.
• Make sure you have installed the latest chipset driver and graphics driver for your computer.
• You may want to disable automatic updates for certain applications that may inhibit performance.
These typically include Adobe applications.
Note: On touch-enabled PCs, swipe from the right side of the screen to display the charms.