User`s guide

18
SONAR REAC Recording System User’s Guide
•
•
•
•
•
•
Software installation
Install SONAR
Install SONAR as described in the SONAR Installation Guide.
Install REAC driver
1. Double click the REACDriverSetup.exe or REACDriverPatchSetup.exe file.
2. When the REAC Driver Setup Wizard appears, follow the on-screen instructions to begin installation.
3. When installation completes, restart the computer.
4. Be sure to download any updates for the REAC driver. You can find updates in the SUPPORT section
(http://www.roland.com/support) of the Roland web site.
Installing the Driver to Use as the Monitoring Device
For details on the installation procedure and settings, refer to the owner's manual of your monitoring device
(the audio interface you're using for monitoring).
Note: If you use REACDriverPatchSetup.exe to install the driver, you may need the product version of
the REAC driver CD-ROM during the installation procedure.
If this occurs, insert the CD-ROM that was included with any REAC driver version 1.0--1.3 into the CD-
ROM drive of your computer.
Note: If you are using the VS-700R, you must install the VS-700R IO Editor:
1. Insert the SONAR V-Studio 700 CD-ROM into your computer's CD/DVD-ROM drive.
2. On the CD-ROM, go to the Tools folder and double-click
Setup.exe .
3. Follow the installation instructions on the screen.
WARNING: Do not connect your monitoring device (the audio interface you're using for monitoring) to
your computer until you are directed to do so. For details on the installation procedure and settings, refer
to the owner's manual of your monitoring device (the audio interface you're using for monitoring).