Owner`s manual

Troubleshooting

When capturing audio data from a CD or MD into your computer, is the

digital input switch “on”?

Turn on the digital input switch.

Does the sample rate of your software match the sample rate of the

digital audio device connected to the digital in connector?

Set the sample rate to the same setting.

If you switch the FA-66’s sample rate, you must turn the power of the FA-66 off,

then on again to get the setting to take effect.

Does your software support 24-bit audio data?

You will need to use software that supports 24-bit audio data.

Is your software set to record/play 24-bit audio data?

Set your software to 24-bit.

Can’t record from a digital connection

Can’t play/record 24-bit audio data

FA-66_e.book 54 ページ２００６年１月１２日　木曜日　午前１１時３２分