Owner`s manual

44
Software settings
Here is an example using Logic Pro 7.0.1.
1.
Power up the FA-66, and then start up Logic.
2.
From the Logic Pro menu, choose Preferences - Audio to open the
Preferences dialog box.
3.
Click the Drivers tab.
4.
In the Core Audio section, select (add a check mark to) the checkbox located at
the left of Core Audio.
fig.logic.eps
5.
If a dialog box like the following appears, click [Try (Re)Launch] .
fig.logic.eps
6.
Set Driver to EDIROL FA-66 .
7. Close the dialog box.
8. If the Aleart dialog box appears, click [Try (Re)Launch] .
Logic
33
66
44
I/O Buffer Size
[Example setting for use at 96 kHz]
As a general guideline, use the following
setting:
PowerPC G4 1 GHz or higher 512
PowerPC G4 1 GHz or lower 1024
Larger Disk Buffer
Check this box if a warning dialog box
such as “Disk is too slow” is displayed.
FA-66_e.book 44 ページ ２００６年１月１２日 木曜日 午前１１時３２分