Owner`s manual

41
Software settings
5.
Restart SONAR, and from SONAR’s Options menu, choose Audio to open the
Audio Options dialog box.
6.
In the General tab, click Wave Profiler .
When Wave Profiler is finished, click [Close] .
fig.sonar-2.eps
7. Click the Drivers tab.
In the lists of Input Drivers and Output
Drivers , click the following devices to
highlight them (white characters on blue
background), and un-highlight all other
devices. Click [OK] .
8.
Restart SONAR, and from SONAR’s Options menu, choose Audio to open the
Audio Options dialog box.
fig.sonar-1b.eps
9.
In the General tab, make sure that
Playback Timing Master is set to EDIROL
FA-66 OUT , and Record Timing Master is
set to EDIROL FA-66 IN .
fig.sonar-3.eps
10.
Click the Driver Profiles tab.
Select EDIROL FA-66 (3 in, 3 out) as the
setting for “Show Profile for,” and then
select “32 bit PCM, left-justified” as the
setting for “Stream > 16 bit data as.”
Input devices
Output devices
EDIROL FA-66 In 1
EDIROL FA-66 Out 1
EDIROL FA-66 In 2 EDIROL FA-66 Out 2
EDIROL FA-66 In 3 EDIROL FA-66 Out 3
FA-66_e.book 41 ページ ２００６年１月１２日 木曜日 午前１１時３２分