Owner`s manual

40
Software settings
You will need to make audio and MIDI device settings for the software you’re
using. Here are some examples for typical software applications.
In this example we are using SONAR 4 Producer Edition.
You must make the following settings if you have switched the FA-
66’s sample rate or have changed the buffer size in the FA-66 Driver
settings dialog box.
1.
Power up the FA-66, and then start up SONAR.
2.
From SONAR’s Options menu, choose Audio to open the Audio Options
dialog box.
3.
Click the Advanced tab.
In the Playback and Recording area, verify that Driver Mode is set to WDM/KS .
* If you change this setting, click [OK] and restart SONAR.
Restart SONAR, and from the Options menu, choose Audio to open the Audio
Options dialog box.
fig.sonar-1.eps
4.
In the General tab, set Audio Driver Bit
Depth to 24 .
Set the Sampling Rate to the same setting as
the FA-66’s sample rate select switch.
If you change this setting, click [OK] and exit
SONAR.
fig.sonar-4.eps
* If the Audio Driver Error dialog box
appears, click [Use Anyway] . If you click
[Disable] , the setting will be discarded.
SONAR 4
FA-66_e.book 40 ページ ２００６年１月１２日 木曜日 午前１１時３２分